100% Australian owned Free shipping Australia-wide for all on-line orders over $100. Select option at checkout.
Tri Clover Tees
- Tri Clover Tee
A$23.89
In Stock unless specified otherwise
SKU
Tri Clover Tees
How to size:
- Measure the OD of the flange-end (TC flange-end) of the Tri Clover Fitting.
- This will give you the TC Flange End Size OD. Match this measurement to the Tri-Clamp Size in the table below.
- The 1" and 1.5" Clover Fittings both have a TC flange end of 50.39mm and so both will take a 1.5" Clamp - TC150.
- Similarly the 1/2" and 3/4" flange ends are the same size of 24.99mm and will take a 3/4" Clamp - TC075.
| FLANGE END OD | TRI CLAMP SIZE |
| 24.99mm - 0.984" | 3/4" Clamp - TC075 |
| 50.39mm - 1.984" | 1.5" Clamp - TC150 |
| 63.91mm - 2.516" | 2" Clamp - TC200 |
| 77.39mm - 3.047" | 2.5" Clamp - TC250 |
| 90.91mm - 3.579" | 3" Clamp - TC300 |
| 118.92mm - 4.682" | 4" Clamp - TC400 |
| 166.88mm - 6.570" | 6" Clamp - TC600 |
Description:
- A Tri Clamp Tee consists of three Tri-Clamp (TC) ends of a Tee shaped Tube.
Uses:
- Stainless Steel Tri-Clamp Tees are used to regulate flow.
- Tri-Clover Tee Fittings are used to combine or separate flow. In essence they are a simplified manifold.
- They are a convenient way to spit a single line into two.
Material:
- All our TC Tees are manufactured from high grade stainless steel.
| Description | How to size:
Description:
Uses:
Material:
| ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Materials | Stainless Steel 304 | ||||||||||||||||
| Size | 1" up to 2" | ||||||||||||||||
| Thread | Tri-Clover Connections |
How to size:
- Measure the OD of the flange-end (TC flange-end) of the Tri Clover Fitting.
- This will give you the TC Flange End Size OD. Match this measurement to the Tri-Clamp Size in the table below.
- The 1" and 1.5" Clover Fittings both have a TC flange end of 50.39mm and so both will take a 1.5" Clamp - TC150.
- Similarly the 1/2" and 3/4" flange ends are the same size of 24.99mm and will take a 3/4" Clamp - TC075.
| FLANGE END OD | TRI CLAMP SIZE |
| 24.99mm - 0.984" | 3/4" Clamp - TC075 |
| 50.39mm - 1.984" | 1.5" Clamp - TC150 |
| 63.91mm - 2.516" | 2" Clamp - TC200 |
| 77.39mm - 3.047" | 2.5" Clamp - TC250 |
| 90.91mm - 3.579" | 3" Clamp - TC300 |
| 118.92mm - 4.682" | 4" Clamp - TC400 |
| 166.88mm - 6.570" | 6" Clamp - TC600 |
Description:
- A Tri Clamp Tee consists of three Tri-Clamp (TC) ends of a Tee shaped Tube.
Uses:
- Stainless Steel Tri-Clamp Tees are used to regulate flow.
- Tri-Clover Tee Fittings are used to combine or separate flow. In essence they are a simplified manifold.
- They are a convenient way to spit a single line into two.
Material:
- All our TC Tees are manufactured from high grade stainless steel.